Figure 3-2. Fitted Cover Rolled Up for Removal.
Tarpaulin Support and Bo w Assembly Replacement.(See figures 3-3 and 3-4.)
(a) Remove fitted cover (paragraph 3-11, a.(1)).
(b) Remove one screw (1, figure 3-3), two flat washers (2), one Iockwasher (3) and one wing nut (4)
securing tarpaulin support (5) to each of four bow assemblies (6) and remove tarpaulin support.
(c) Remove two quick release pins (1, figure 3-4) securing each bow assembly (2) in pocket (3) on trailer
body (4). Lift each bow out of pocket and off trailer body.
Lift each bow (2, figure 3-4) onto trailer, aline bow ends with pockets (3) in trailer body (4) and drop
bow in place. Secure each bow assembly with two quick release pins(1) provided.
Position tarpaulin support (5, figure 3-3) on bows (6) and secure tarpaulin support to each bow with
one screw (1), two flat washers (2), one Iockwasher (3) and one wing nut (4).
Install fitted cover on trailer (paragraph 3-11, a.(2)).