Section II. DESCRIPTION AND DATA
1-9. Description. Power Plant AN/MJQ-10A is made up of two PU-406B/M power units. Each power unit is,
in turn, made up of one Tactical Utility Generator Set, DOD Model MEP-005A, mounted on a modified M200A1
trailer. These generator sets are liquid-cooled, diesel engine-driven units, each with a load capacity of 30 KW at
60 Hz. The trailers are two-wheeled units with dual tires mounted. Each trailer has a 2 1/2-ton carrying capacity.
The modifications to the basic trailers provide storage for the accessories and all equipment necessary for mobile
operation as well as providing a work platform for the operator and maintenance personnel. Output from the
power plant is applied to the system or equipment being powered through a switch box. The AN/MJQ-10A is
supplied with a 5-wire configuration switch box. Figures 1-1 and 1-2 illustrate the power plant.
1-10. Tabulated Data. The tabulated data provides operator and unit level personnel with the dimensions
and weights for Power Plant, AN/MJQ-10A. These specifications are computed from the combined dimensions
and weights of the two power units that make up the power plant. Specifications for a single PU-406B/M power
unit can be found in TM 5-6115-626-14&P. For additional information concerning Generator Set DOD Model
MEP-005A, refer to TM 5-6115-465-12, -34, and -24P. For additional information on the M200A1 trailer, refer to
TM 9-2330-205-14&P. The tabulated data also includes the location and content of all data plates unique to the
and Warning Plates.
(1) Modification identification plate.
(a) Location. This plate is located on the front roadside frame between the trailer body and Iunette.
MODIFIED FOR POWER PLANT AN/MJQ-10A
UNIT A (or B, as applicable)
(2) Identification plate.
(a) Location. This plate is located on front roadside frame between trailer body and Iunette.
PU-406B/M KW 30 HERTZ 50/60