TM 3-1040-280-20&P
2-5.
INSTALLATION INSTRUCTIONS (CONT).
j.
Cable and Hose Assemblies.
INSTALLATION
1
a. Release two latches (1 ) securing companion seat and battery box cover (2) to battery box (3).
b. Remove companion seat and battery box cover from battery box (3) by lifting front of cover up and pulling it forward.
2
WARNING
Metal objects such as rings or tools can short circuit the battery and
cause severe burns to personnel. Remove all jewelry before starting
work. Do not allow tools to contact the vehicle when removing or
installing battery cables.
a. Disconnect vehicle ground cable (4) from terminal clamp (5) on battery.
b. Disconnect vehicle positive cable (6) from terminal clamp (7) on battery.
c. Remove interconnecting battery cable (8), battery holddown (9), and rear battery (10) from battery box (3). Refer to
TM 9-2320-280-20.
2-14