Install switch (1), mounting nut (4), knurled nut (3), and reconnect leads to switch (1).
Raise and secure control panel (2).
Reconnect negative battery cable.
INSPECTION OF OPERATING PLATE, FUNCTION CODE PLATE, AND ID PLATE
Inspect plate for illegible instructions, dents, cracks, etc.
REPLACEMENT OF OPERATING PLATE, FUNCTION CODE PLATE, AND ID PLATE
Using electric drill with 1/8" drill bit, drill each of the rivets and punch out.
Substitute new operation plate, function code plate, and id plate for defective ones. Install plates using blind rivets.
Figure 4-24. Plate, Operation and Heater